Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise runs $380 to $1,850 per opening depending on whether you’re swapping a sash or rebuilding a rough opening for HVHZ compliance. Most Sunrise jobs we measure are booked within 48 hours, with installation scheduled once the Broward County permit clears. Our crews serve Sunrise from our South Florida scheduling office, and we know the difference between a straight insert replacement on a 1990s vinyl window and the full opening conversion a 1970s jalousie assembly demands.
Call (754) 254-7558 to schedule your free measured survey. You’ll keep the document, and the written quote will match it exactly.
Why Sightline Windows & Doors Margate Is Sunrise’s Preferred Window Replacement Company
We’ve installed and replaced windows and doors across Broward County since 2012, and Sunrise represents a distinct category of work. The city’s planned-community roots left thousands of homes with original single-pane aluminum and jalousie installations that are now 40 to 55 years old. Our Window Replacement team has completed hundreds of openings in Sunrise neighborhoods from Sunrise Golf Village to Welleby, and we pull Broward HVHZ permits on every job.
Our reviews from Sunrise customers consistently cite two things: the measured survey they keep, and the documented photo record we leave. The 365-Day Done Right Promise is stamped on every job under the Haven Standard, not offered as a courtesy. Calls are answered by a live person, 24/7, and our background-checked, uniformed technicians arrive with license numbers visible.
Response time to Sunrise is typically same-week for measurement, with installation following permit approval. We don’t quote over the phone because Haven Clause 1 requires the measurement and the quote to be the same document.
Our Window Replacement Services in Sunrise
Full Frame Replacement
Full frame replacement is the standard scope for most pre-1980 Sunrise homes. The city’s older subdivisions still carry original jalousie windows - louvered glass panels that are essentially open to the wind and completely ineligible under HVHZ code. Nearly every Sunrise window replacement on these homes is really an opening conversion, not a like-for-like swap. Our crew removes the jalousie assembly, builds and flashes new structural openings, waterproofs the rough frame, and hangs NOA-listed impact-rated units. That’s why the rough-opening scope, not the glass, usually drives the bid on those jobs. A typical full frame replacement in Sunrise runs $1,200-$1,850 per opening.
Insert Window Replacement
Insert replacement fits a new window into an existing, code-compliant frame without disturbing the exterior trim or siding. This scope works in Sunrise when the original frame is structurally sound, properly flashed, and already sized for an NOA-listed unit. We see this most often on 1980s and 1990s CBS homes in neighborhoods like Sawgrass Estates where the original aluminum frames are degraded but the rough openings were built to later standards. Insert replacement in Sunrise typically runs $580-$920 per opening. We verify frame condition during the measured survey; if the opening won’t pass HVHZ inspection as-is, we flag the conversion to full frame before quoting.
Vinyl Replacement Windows
Vinyl replacement windows are specified for Sunrise openings where thermal performance and corrosion resistance matter. Broward County’s year-round high humidity and salt-laden air corrode aging aluminum frames and hardware, and vinyl with multi-chamber construction and welded corners holds up better in this environment. We specify vinyl units from ECO Window Systems and ES Windows with impact-rated laminated glass interlayers, not standard dual-pane. A vinyl replacement in Sunrise runs $680-$1,150 per opening depending on impact rating and glazing package.
Energy-Efficient Upgrade
Energy-efficient upgrades in Sunrise target the cooling load that dominates local utility bills. We specify Low-E coatings with low SHGC values to reject solar heat, paired with argon fill and warm-edge spacers. The upgrade matters here because Sunrise’s intense UV degrades non-impact window seals within a few years, and poorly specified glass can actually increase heat gain. Our energy-efficient upgrades use NOA-listed impact products from PGT and ES Windows with documented U-factor and SHGC ratings. Expect $780-$1,320 per opening. The measured survey includes a frame reading and sightline measurement so the glazing specification matches the opening’s solar exposure.
Window Maintenance & Care
Window maintenance in Sunrise focuses on hardware corrosion, seal degradation, and impact-rated unit integrity after storm seasons. We inspect frame drainage, weep holes, and laminated glass edge seals. Maintenance calls in Sunrise often reveal that original aluminum units are past useful life but still functional; we document condition with photos and provide a written scope if replacement is the better value.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Sunrise
We draw from eight verified manufacturer lines specified by what the opening requires, not by what is in stock. For Sunrise’s HVHZ environment, we most often specify PGT WinGuard impact-rated casement and single-hung units, ES Windows for vinyl impact frames with strong thermal numbers, and ECO Window Systems where cost-efficient NOA compliance is the priority. Therma-Tru entry systems pair with window jobs on full-opening conversions. We don’t stock inventory; we order to the measured survey, which means Sunrise customers get current production units with current NOA documentation, not warehouse clearance product with expired certifications.
Common Window Replacement Problems We See in Sunrise Homes
- Jalousie assemblies in pre-1980 subdivisions. Sunrise Golf Village and Welleby still contain thousands of original louvered windows that cannot be repaired to HVHZ standard. The slats leak air and water, the cranks corrode, and the opening itself has no structural frame to anchor impact-rated product. Full conversion is the only compliant path.
- Corroded aluminum frames from salt-laden air. Sunrise’s position inland from the Atlantic still exposes homes to humidity-driven corrosion that pits aluminum frames, freezes hardware, and compromises weatherstripping seals. We see this accelerate on east-facing elevations.
- Failed seals on non-impact dual-pane units. The intense UV that degrades non-impact window seals in Sunrise causes fogging between panes and thermal performance collapse. Once the seal fails, the insulating gas escapes and the Low-E coating deteriorates.
- Non-compliant product from out-of-county installers. Cheap quotes that install replacement sash or insert units into jalousie openings without engineering the rough opening pass visual inspection but fail HVHZ permit review, leaving no NOA on record for the address. We red-tag these during second-opinion calls regularly.
Pricing for Window Replacement in Sunrise, FL
| Service Type | Price Range (Per Opening) | Typical Scope |
|---|---|---|
| Insert Window Replacement | $580 - $920 | New unit in existing compliant frame |
| Vinyl Replacement Window | $680 - $1,150 | Vinyl frame with impact-rated glazing |
| Energy-Efficient Upgrade | $780 - $1,320 | Low-E impact glass, argon fill, documented ratings |
| Full Frame Replacement | $1,200 - $1,850 | Opening conversion, structural rebuild, NOA unit |
What moves a job toward the top of the range: jalousie-to-impact conversion requiring structural rough-opening work, custom geometric shapes, third-story or difficult access, and premium glazing packages with the lowest SHGC values. What keeps cost down: straightforward insert replacement on a compliant frame, standard rectangular sizes, and ground-floor access. Every quote is written before any work starts, and the measured survey you keep is the same document that generates the price. Call (754) 254-7558 for your free estimate.
We Also Serve Cities Near Sunrise
Our crews work across Broward County and into adjacent markets. We also provide Window Replacement in Sunrise and surrounding cities including Margate, North Lauderdale, Coconut Creek, and Coral Springs. Each city’s permit environment and housing stock differs; we quote to the local standard, not a regional average.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
Every window and door replacement in Sunrise must use products carrying a Miami-Dade Notice of Acceptance (NOA), must be pulled under a Broward County HVHZ permit, and must pass inspections to a stricter wind-load standard than anywhere north of the county line. Palm Beach County does not sit inside the High-Velocity Hurricane Zone, so product selection and permitting are fundamentally different. A quote that doesn’t line-item the NOA number, permit fee, and inspection schedule is not a compliant Sunrise quote. Call (754) 254-7558 and we’ll review any written estimate at no charge.
Jalousie windows cannot be repaired to HVHZ compliance; the louvered design is inherently non-impact-rated and cannot achieve a Miami-Dade NOA. In Sunrise, replacement means full removal of the jalousie assembly and construction of a new structural opening before an NOA-listed unit can be installed. Repair is not an option that will pass Broward County inspection. We measure the opening, document the scope, and provide a written price for the conversion.
Properly documented window replacement with NOA-listed impact products and passed HVHZ inspection qualifies for windstorm mitigation credits on your Florida homeowner’s policy. The key is the wind-mitigation form (OIR-B1-1802), which must be updated to reflect the new opening protection. We provide the NOA documentation, inspection report, and photo record; your agent submits the form. Without this paper trail, you keep paying the pre-impact premium even though the rating is already on your house. On a 1974 CBS ranch in Sunrise’s Sunrise Golf Village area, our crew pulled the original aluminum jalousie windows, built and flashed new structural openings for the louver frames, and set impact-rated PGT WinGuard casement units with laminated glass interlayer. The homeowner kept their old policy until our final Broward HVHZ inspection and wind-mitigation paperwork were issued, then submitted the documentation for the windstorm credit - turning the project into both a code fix and a paper trail the insurer could verify.
Yes, but only if the SHGC is specified correctly for your elevation and exposure. Low-E impact glass with a low Solar Heat Gain Coefficient rejects infrared heat while passing visible light. In Sunrise’s climate, east and west elevations benefit most. The measured survey includes a frame reading and sightline assessment so we specify the glazing package, not just the brand. Expect cooling load reduction of 15-25% when replacing single-pane aluminum with properly specified Low-E impact units, though your results depend on the home’s overall envelope. Call (754) 254-7558 and we’ll include energy performance projections in your written quote.
A compliant quote includes: the Miami-Dade NOA number for the specific product, the Broward County HVHZ permit fee, the inspection schedule, rough-opening engineering for jalousie conversions, wind-mitigation form update service, and the documented photo record. Cheap quotes often omit permit costs, use non-NOA product from outside the HVHZ supply chain, or install inserts into non-compliant frames. These get red-tagged at final inspection, forcing removal and re-install at full cost. Haven Clause 1 means our written quote contains every line item before any work starts. Call (754) 254-7558 for a written estimate that includes what the code actually requires.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.