Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Sunrise, FL
Window installation in Sunrise runs $380 to $1,200 per opening depending on frame material, glazing package, and whether the existing rough opening needs structural reinforcement for HVHZ compliance. Most Sunrise homes built between the late 1960s and 1980s carry original single-pane aluminum or jalousie windows that fail current Broward County codes, so replacement typically involves full-opening work rather than simple sash swaps. Call (754) 254-7558 to schedule your free measured survey; the written quote we leave with you is the same document that governs the installation.
Why Sunrise Homes Are Different
Sunrise sits inside Broward County’s High-Velocity Hurricane Zone, one of only two U.S. counties with this designation. Every window and door replacement here requires products carrying a Miami-Dade Notice of Acceptance, a Broward County HVHZ permit, and inspection to stricter standards than anywhere north of the county line. The city’s planned-community development from the late 1960s through the 1980s left a dominant stock of CBS single-family homes and low-rise condos with original single-pane aluminum-frame or jalousie windows now 40 to 55 years old. Those jalousie installations, common in 1970s subdivisions like Sunrise Golf Village, are louvered glass panels essentially open to wind and completely ineligible under HVHZ code, making full-opening replacement with structural rough-opening work the norm.
Broward’s southeast Florida position means Sunrise absorbs direct Atlantic hurricane tracks, intense UV that degrades non-impact seals and vinyl frames within a few years, and salt-laden air that corrodes aging aluminum hardware. We see accelerated routine degradation alongside post-storm emergency demand, and we stock HVHZ-rated products from PGT, CGI, and ECO Window Systems to avoid the delays that come with special-ordering compliant materials after a storm.
Our Main Sunrise Services
Most Sunrise homeowners who call us start with one of two needs: replacing failed original windows with HVHZ-compliant units, or upgrading to impact-rated doors that satisfy both code and insurance requirements. These three dedicated Sunrise pages cover the jobs we perform most often.
Window Replacement in Sunrise
We replace original single-pane aluminum and jalousie windows across Sunrise’s 1970s and 1980s housing stock with HVHZ-compliant units that carry Miami-Dade NOA certification. Every job begins with a measured survey documenting existing rough-opening dimensions, frame condition, and structural requirements for Broward County permit submission. The written quote you keep reflects those measurements exactly; it does not change once work starts. Window Replacement in Sunrise covers our full process, product lines by performance tier, and what to expect during inspection.
Impact Windows & Doors in Sunrise
Impact-rated products are not optional in Sunrise; they are code-required for any replacement and often the only path to insurance premium reductions. We specify PGT and CGI lines for high-velocity zones, with laminated glass packages tested to Miami-Dade protocols. Our crews pull Broward County HVHZ permits and schedule required inspections as part of the scope, not as an add-on. Impact Windows & Doors in Sunrise details the NOA documentation, the permitting timeline, and the photo record you receive at completion.
Sliding & Patio Doors in Sunrise
Original sliding doors in Sunrise’s older condos and townhomes often run on corroded aluminum tracks with single-pane glass that leaks air and fails impact standards. We replace these with multi-point-lock, impact-rated sliding systems from CWS and ES Windows, sized to existing openings or modified for improved sightlines. The measured survey notes track depth, header load, and drainage plane integration with stucco exteriors. Sliding & Patio Doors in Sunrise explains our specification process and the documentation you keep.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Sunrise
Window installation in Sunrise differs from work in Palm Beach County or points north because every product must carry Miami-Dade NOA certification and every permit must be pulled under Broward County’s HVHZ program. The city’s 1960s-1980s housing stock, built as a planned community, typically presents original single-pane aluminum or jalousie windows that are now past useful life and completely non-compliant with current code. We perform Window Installation under the Haven Standard, beginning with a measured survey that becomes your written quote and ending with a documented photo record and the 365-Day Done Right Promise.
Single & Double Hung Windows
Signs you need it
Frames show salt corrosion at the sill, sashes no longer stay open without a prop, or you feel air movement around closed units during a blower door test.
What it costs in Sunrise
Single and double hung window installation in Sunrise typically ranges from $420 to $980 per opening for vinyl-framed, impact-rated units with Low-E glazing.
How we do it
We remove the existing frame to the rough opening, inspect the sill plate for moisture damage common in CBS stucco homes, install the new unit with HVHZ-approved anchoring pattern, foam seal, and stucco patch integration, then schedule Broward County inspection.
Horizontal Roller Windows
Signs you need it
Roller mechanism grinds or sticks, track shows aluminum oxide buildup, or the lock no longer engages the keeper due to frame sag.
What it costs in Sunrise
Horizontal roller window installation in Sunrise typically ranges from $480 to $1,050 per opening for impact-rated units with stainless steel rollers and Miami-Dade NOA.
How we do it
We document existing track depth and header condition, remove the old unit, install the new roller frame with integrated drainage, verify operation under load, and capture photo evidence of anchoring pattern before wall closure.
What Window Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Single or double hung window, vinyl frame, impact-rated | $420 - $980 per opening |
| Horizontal roller window, impact-rated with stainless hardware | $480 - $1,050 per opening |
| Structural rough-opening modification for jalousie replacement | $180 - $450 per opening |
Do you pull permits for window installation in Sunrise?
Yes. Every window installation in Sunrise requires a Broward County HVHZ permit, and we pull and schedule inspections as standard scope. Call (754) 254-7558 to schedule your free measured survey; the permit timeline is included in your written quote.
Will the price change once work starts on my windows?
No. Haven Clause 1 states that the measured survey and the written quote are the same document; if we encounter concealed damage, we document it, stop work, and present a revised scope in writing before continuing. Call (754) 254-7558 for your free estimate.
Door Installation in Sunrise
Door installation in Sunrise must satisfy the same HVHZ requirements as windows, with the added complexity of multi-point locking systems and threshold integration with CBS slab construction. Original entry doors in 1970s Sunrise subdivisions are often hollow-core or thin-gauge metal units with single-point locks and no impact rating, making them both a code violation and an insurance liability. We perform Door Installation with pre-hung, impact-rated systems from Therma-Tru and ViewLux, measured to your existing jamb depth and rough opening.
Hurricane-Proof Front & Entry Doors
Signs you need it
Door face shows rust-through or delamination, jamb splits at the strike plate, or your insurance renewal requires documented impact-rated entry protection.
What it costs in Sunrise
Hurricane-proof front and entry door installation in Sunrise typically ranges from $1,800 to $4,200 for a pre-hung, impact-rated fiberglass or steel unit with multi-point lock and Miami-Dade NOA.
How we do it
We measure jamb depth, rough opening plumb, and threshold height against CBS slab, specify the pre-hung unit with integrated sill pan, install with HVHZ anchoring pattern, verify lock engagement and sweep compression, and schedule inspection.
French & Double Doors
Signs you need it
Active door sags and scrapes the threshold, astragal seal is compressed or missing, or original units are single-pane with no impact rating and no NOA documentation.
What it costs in Sunrise
French and double door installation in Sunrise typically ranges from $2,400 to $5,800 for impact-rated, pre-hung pairs with laminated glass and multi-point lock sets.
How we do it
We verify header load capacity for the wider rough opening, install the pre-hung pair with integrated astragal and adjustable hinges, align active and passive doors for uniform reveal, and test seal compression before documentation.
What Door Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hurricane-proof front and entry door, pre-hung, impact-rated | $1,800 - $4,200 |
| French and double door pair, impact-rated with laminated glass | $2,400 - $5,800 |
| Threshold modification for CBS slab integration | $280 - $650 |
Do French doors in Sunrise need impact-rated glass?
Yes. Any replacement door in Broward County’s HVHZ must use impact-rated glazing with Miami-Dade NOA; non-rated glass will fail inspection. Call (754) 254-7558 for a free measured survey and written quote.
How long does door installation take in Sunrise?
Most single entry door installations complete in one day; French or double door pairs with header work typically require two days plus inspection scheduling. Call (754) 254-7558 for a timeline with your written quote.
Energy-Efficient Windows in Sunrise
Energy-efficient windows in Sunrise address a specific local problem: original single-pane aluminum units conduct heat so aggressively that HVAC systems run continuously during summer months, and the intense UV degrades interior finishes within two to three years. The same HVHZ requirements that mandate impact rating also create an opportunity, since laminated and insulated glass packages with Low-E coatings simultaneously satisfy code and reduce solar heat gain. We perform Energy-Efficient Windows with products from ECO Window Systems and Mr-Glass, specified by U-factor and SHGC performance rather than by margin.
Low-E & Argon Gas Glass
Signs you need it
Rooms with western exposure exceed 78 degrees despite HVAC running, or you have replaced faded flooring or furnishings in south-facing rooms more than once.
What it costs in Sunrise
Low-E and argon gas glass upgrade in Sunrise typically adds $80 to $180 per opening above base impact-rated glazing, with payback periods under four years in high-cooling-load homes.
How we do it
We calculate orientation-specific solar heat gain coefficients, specify the appropriate Low-E coating surface and argon fill percentage, verify spacer type for longevity in high-humidity conditions, and document performance ratings on the written quote.
Insulated Laminated Glass
Signs you need it
Condensation forms between panes on existing insulated units indicating seal failure, or exterior noise from Sunrise Boulevard traffic penetrates closed windows.
What it costs in Sunrise
Insulated laminated glass installation in Sunrise typically ranges from $580 to $1,280 per opening for triple-pane or laminated-IGU configurations with stainless steel spacers.
How we do it
We measure existing frame depth for IGU thickness compatibility, specify laminated outer lite with Low-E inner lite and warm-edge spacer, verify weight load on original hardware or upgrade balances, and test for seal integrity before documentation.
What Energy-Efficient Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Low-E and argon gas upgrade, per opening | $80 - $180 above base |
| Insulated laminated glass, triple-pane or laminated IGU | $580 - $1,280 per opening |
| Full replacement with ENERGY STAR rated, impact-compliant unit | $520 - $1,150 per opening |
Do energy-efficient windows still meet HVHZ in Sunrise?
Yes. We specify only products that carry both Miami-Dade NOA and ENERGY STAR certification; the ratings are not mutually exclusive. Call (754) 254-7558 for performance specifications on your written quote.
Will efficient windows lower my FPL bill in Sunrise?
Most Sunrise homeowners see cooling-load reduction of 15 to 25 percent after replacing single-pane aluminum with Low-E, argon-filled impact units; your measured survey includes orientation-specific projections. Call (754) 254-7558 for a free estimate.
Impact Garage Doors in Sunrise
Impact garage doors in Sunrise are frequently overlooked in HVHZ compliance planning, yet they represent the largest unprotected opening in most homes and the most common point of failure during pressure events. Original garage doors in Sunrise’s 1970s and 1980s stock are typically non-rated, 24-gauge steel or wood-panel units with no wind-load documentation, and replacement requires both product selection and structural verification of the header and jambs. We perform Impact Garage Doors with wind-rated systems from Mr-Glass and ViewLux, engineered to the specific exposure and wind-speed requirements of your Sunrise address.
Hurricane-Rated Garage Doors
Signs you need it
Door panels show rust-through or delamination, opener strain is visible during cycling, or your insurance inspection noted lack of wind-load rating on the garage opening.
What it costs in Sunrise
Hurricane-rated garage door installation in Sunrise typically ranges from $2,200 to $5,400 for a wind-load-rated, impact-resistant sectional door with reinforced track and heavy-duty hardware.
How we do it
We measure opening width, headroom, and side-room, calculate wind-load requirement by exposure category and structure height, specify the rated door with reinforced struts and upgraded track gauge, and install with HVHZ-compliant jamb attachment before inspection.
Wind-Load Code Compliance
Signs you need it
Permit application for any window or door replacement triggered a garage door inspection requirement, or you received a code violation notice citing unprotected garage opening.
What it costs in Sunrise
Wind-load code compliance upgrade for existing garage doors in Sunrise typically ranges from $680 to $1,850 for retrofit reinforcement kits, or $2,200 to $5,400 for full replacement with rated door and track system.
How we do it
We assess existing door and track capacity against current Broward County wind-load tables, engineer a retrofit or replacement solution with stamped drawings if required, install with documented fastening pattern, and provide the NOA and installation certificate for permit closure.
What Impact Garage Doors Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hurricane-rated garage door, full replacement with reinforced track | $2,200 - $5,400 |
| Wind-load retrofit reinforcement kit, existing door | $680 - $1,850 |
| Header and jamb structural reinforcement for rated installation | $450 - $1,200 |
Does my garage door need impact rating if I’m only replacing windows?
Broward County HVHZ inspectors often require garage door protection before signing off on other opening replacements; we check this during your measured survey to avoid permit delays. Call (754) 254-7558 for a free assessment.
Can I keep my garage door opener with a new impact door?
Most openers require upgrade or replacement to handle the additional weight of wind-rated, reinforced doors; we specify compatible operators as part of the scope. Call (754) 254-7558 for written options.
Custom & Geometric Windows in Sunrise
Custom and geometric windows in Sunrise solve a design problem specific to the area’s 1970s and 1980s architecture: original builder-grade openings with unusual proportions, arched tops, or grouped geometric assemblies that standard replacement units cannot fill without destroying the home’s character. The same HVHZ requirements apply, but the engineering is more complex since custom shapes must still pass Miami-Dade missile-impact and cyclic-pressure testing. We perform Custom & Geometric Windows with templated, NOA-certified products from PGT and CGI, measured to your existing sightline with documented tolerances.
Geometric & Shaped Windows
Signs you need it
Original trapezoid, octagon, or triangular windows show seal failure or frame corrosion, or you have been told standard rectangular replacements are your only option.
What it costs in Sunrise
Geometric and shaped window installation in Sunrise typically ranges from $780 to $2,400 per opening depending on complexity, with multi-lite assemblies running higher due to engineering and templating requirements.
How we do it
We create a full-size template of your existing opening, specify the geometric unit with Miami-Dade NOA for that exact configuration, fabricate with laminated impact glass and reinforced frame corners, and install with custom flashing integration for the non-rectangular geometry.
Arched & Curved Windows
Signs you need it
Radius-top or elliptical windows show condensation at the springline, or the curved frame has separated from the rectangular portion due to differential thermal expansion of dissimilar materials.
What it costs in Sunrise
Arched and curved window installation in Sunrise typically ranges from $1,200 to $3,800 per opening for custom-radius, impact-rated units with matching sightlines to adjacent rectangular windows.
How we do it
We measure the radius or ellipse with three-point verification, specify the arched unit from a manufacturer with tested NOA for that radius range, fabricate with heat-bent or extruded frame options depending on size, and integrate the curved head flashing with existing stucco or siding.
What Custom & Geometric Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Geometric and shaped window, single unit | $780 - $2,400 per opening |
| Arched and curved window, custom radius | $1,200 - $3,800 per opening |
| Multi-lite geometric assembly, templated and engineered | $2,800 - $6,500 per assembly |
Can custom windows still be impact-rated in Sunrise?
Yes, but only from manufacturers with Miami-Dade NOA covering the specific geometric configuration; we verify this before templating, not after fabrication. Call (754) 254-7558 for a free measured survey and NOA confirmation.
How long do custom geometric windows take to fabricate?
Most custom geometric units require eight to fourteen weeks from template approval to delivery, with permitting running concurrent; we build this timeline into your written quote. Call (754) 254-7558 to start the templating process.
Brands We Service in Sunrise
We specify from eight verified manufacturer lines in Sunrise: PGT and CGI for high-velocity impact performance, CWS and ES Windows for mid-tier value, ECO Window Systems and Mr-Glass for energy-efficient and specialty applications, Therma-Tru for entry door systems, and ViewLux for premium sightline and custom work. We stock common HVHZ-rated frames and hardware locally at our Miami office, with most standard sizes available for measurement-to-install cycles under three weeks. See our brands for performance tier details and specification guidance.
Pricing for Windows & Doors in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Single or double hung window, impact-rated | $420 - $980 per opening |
| Horizontal roller window, impact-rated | $480 - $1,050 per opening |
| Structural rough-opening modification | $180 - $450 per opening |
| Hurricane-proof entry door, pre-hung | $1,800 - $4,200 |
| French and double door pair, impact-rated | $2,400 - $5,800 |
| Low-E and argon gas upgrade | $80 - $180 above base per opening |
| Insulated laminated glass, triple-pane | $580 - $1,280 per opening |
| Hurricane-rated garage door, full replacement | $2,200 - $5,400 |
| Garage door wind-load retrofit kit | $680 - $1,850 |
| Geometric and shaped window | $780 - $2,400 per opening |
| Arched and curved window, custom radius | $1,200 - $3,800 per opening |
Prices in Sunrise trend toward the upper end of these ranges when existing openings require structural reinforcement for HVHZ compliance, when stucco integration demands color-matched patching, or when original jalousie installations need full rough-opening rebuild. Every quote is written before work starts under Haven Clause 1; the measured survey you keep and the final invoice are the same document.
Neighborhoods We Serve in Sunrise
We perform window and door installation across Sunrise’s full residential footprint, from the original 1970s planned sections to newer infill and condo developments. Most Sunrise addresses fall within a 30-minute response window from our Miami office dispatch.
- Sunrise Golf Village
- Sawgrass Estates
- Welleby
- New Orleans Park
- Sunrise Lakes (condo associations)
Service Area - Cities Near Sunrise
Our crews serve the full Broward County HVHZ corridor from our Miami office, with daily routes through Margate, FL, North Lauderdale, FL, Coconut Creek, FL, and Coral Springs, FL. All neighboring cities share the same High-Velocity Hurricane Zone requirements, the same Miami-Dade NOA product standards, and the same Broward County permitting process that governs our Sunrise work.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Sunrise
Yes. Every window and door replacement in Sunrise requires a Broward County HVHZ permit with Miami-Dade NOA product documentation; we pull permits and schedule inspections as standard scope on every job, included in your written quote.
Most Sunrise HOAs require architectural review for visible exterior changes; we provide product cut sheets, NOA documentation, and color samples as part of your submittal package, and we have worked with Welleby, Sawgrass, and Sunrise Lakes associations on prior approvals.
Call (754) 254-7558; a live person answers 24/7. We schedule surveys across Sunrise within 48 hours, and you keep the measured document with your written quote under Haven Clause 1.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.