Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Coral Springs, FL
Window installation in Coral Springs typically runs $650-$1,400 per opening for standard vinyl or aluminum units, and $1,200-$2,800 for impact-rated replacements, with most full-home jobs completed in 2-4 days once permits clear. The city’s master-planned neighborhoods along West Sample Road and Atlantic Boulevard are filled with CBS homes built between 1968 and 1992 that still carry original single-pane aluminum windows and sliding glass doors - products that fail current HVHZ standards and draw insurance surcharges. We measure every opening on the first visit, hand you the written price before any work starts, and leave a documented photo record when the job is done. Call (754) 254-7558 to schedule your free estimate.
Why Coral Springs Homes Are Different
Coral Springs sits within Broward County’s High-Velocity Hurricane Zone, one of only two Florida counties subject to the strictest tier of the Florida Building Code. Every window and door replacement must carry a valid Miami-Dade Notice of Acceptance or HVHZ-rated Florida Product Approval - not just a standard impact rating.
The housing stock tells the rest of the story. The planned community was built out heavily between the late 1960s and early 1990s, leaving neighborhoods like Kensington Commons with concrete block and stucco homes that commonly retain original aluminum-frame single-pane sliders and jalousie windows. These units are past functional life, corroded by decades of humidity and afternoon thunderstorms, and flagged by insurers for steep surcharges.
Then there’s the double-approval layer. Nearly every neighborhood operates under an active HOA with an architectural review board. A replacement job requires Broward County permitting for HVHZ compliance AND board sign-off on frame color, style, and grid pattern. Contractors coming in from Pompano Beach or Deerfield Beach routinely underestimate this, causing delays that push projects into the next permitting cycle.
Our Main Coral Springs Services
Most Coral Springs homeowners who call us start with one of these three projects.
Window Replacement in Coral Springs
Full-frame removal of original aluminum single-pane units and replacement with HVHZ-compliant impact or energy-efficient windows, measured to the exact rough opening and specified from our eight manufacturer lines. In Coral Springs, we regularly find frame corrosion at the sill and head jamb from humidity intrusion - conditions we document in the measured survey you keep. Window Replacement in Coral Springs covers the complete scope, permitting timeline, and product selection process.
Impact Windows & Doors in Coral Springs
Installation of Miami-Dade NOA or Florida Product Approved impact-rated units across all opening types, from single hung to sliding glass to entry systems. Coral Springs’s inland location doesn’t exempt it from the debris field; wind-borne projectiles during hurricane season travel well past the coastline. Impact Windows & Doors in Coral Springs details the code requirements, insurance documentation, and product tiers we specify.
Sliding & Patio Doors in Coral Springs
Replacement of original 1970s and 1980s aluminum sliding glass doors with modern multi-panel impact or energy-efficient systems, including 3-panel and 4-panel configurations for expanded sightlines. The old single-pane units in Coral Springs homes are notorious for corroded rollers, failed weatherstripping, and frames that flex in high wind. Sliding & Patio Doors in Coral Springs walks through the measured survey, hardware options, and HOA coordination.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Coral Springs
Window installation in Coral Springs means working within the HVHZ code tier and the city’s dense concentration of 1968-1992 CBS homes with original aluminum single-pane units. We regularly measure openings in Kensington Commons and along corridors like West Sample Road where the frames have corroded through at the sill, the glazing is single-pane clear, and the hardware is no longer manufactured. Window Installation covers our full methodology; here’s how we handle the most common opening types in this market.
Single & Double Hung Windows
Signs you need it
The sash won’t stay open, the balance system is visible and corroded, or you feel air movement at the meeting rail during a thunderstorm gust.
What it costs in Coral Springs
Standard vinyl single hung: $650-$950 per opening installed; impact-rated single or double hung: $1,200-$2,100 per opening installed.
How we do it
We remove the entire frame to the rough opening, inspect the sill pan and header for moisture damage, install the new unit with HVHZ-approved anchoring pattern, seal with backer rod and silicone, then photograph the installation and flashing details for your record.
Horizontal Roller Windows
Signs you need it
The sash jumps the track, the rollers grind, or the screen frame is bent from forced operation of a corroded system.
What it costs in Coral Springs
Standard aluminum horizontal roller: $750-$1,100 per opening; impact-rated horizontal roller: $1,400-$2,400 per opening.
How we do it
We verify the rough opening is square to 1/4 inch, set the frame on composite shims, fasten through the jamb with stainless screws at 12-inch centers per HVHZ schedule, test the sash operation across full travel, and document the sightline alignment before sealing.
What Window Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Standard vinyl single hung (per opening) | $650-$950 |
| Impact-rated single/double hung (per opening) | $1,200-$2,100 |
| Impact-rated horizontal roller (per opening) | $1,400-$2,400 |
How long does window installation take in Coral Springs?
Most full-home jobs run 2-4 installation days once Broward County permits and HOA approval clear, which typically adds 3-6 weeks in Coral Springs due to the dual-approval track. We coordinate both submissions from the measured survey so the timelines run parallel, not sequential. Call (754) 254-7558 and we’ll review your HOA documents at no charge.
Will the price change once work starts?
No. Haven Clause 1 means the measured survey and the written quote are the same document. If we encounter hidden rot or structural damage during removal, we document it, stop work, and present a written amendment before proceeding - never a verbal upcharge. Call (754) 254-7558 for your free estimate.
Door Installation in Coral Springs
Door installation in Coral Springs faces the same HVHZ compliance layer as windows, with the added complexity of entry door systems that must meet pressure and impact standards while satisfying HOA architectural review boards on color, panel profile, and glass design. We measure the rough opening, jamb depth, and threshold condition on the first visit, then specify from our eight manufacturer lines including Therma-Tru for entry systems and PGT for impact-rated sliders. Door Installation details our full process.
Entry Doors
Signs you need it
The jamb is soft at the sill, the door binds in humid weather, or the deadbolt no longer aligns with the strike due to frame settlement.
What it costs in Coral Springs
Standard fiberglass entry door with basic hardware: $1,800-$3,200 installed; impact-rated entry door with HVHZ glass and multi-point lock: $3,500-$6,500 installed.
How we do it
We remove the unit to the rough opening, replace rotted framing with pressure-treated material, install the pre-hung door with composite shims and HVHZ-approved fasteners, adjust the multi-point lock for smooth engagement, and photograph the threshold pan flashing before the customer walkthrough.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurer has flagged the existing door for non-compliance, or the glass lite is single-pane and unprotected by shutters.
What it costs in Coral Springs
Impact-rated entry door with NOA-approved glass and frame: $3,500-$6,500 installed; high-end Therma-Tru or PGT systems with decorative glass: $5,000-$8,500 installed.
How we do it
We verify the NOA matches the specific door size and glazing pattern, submit the product approval with the Broward County permit, install with HVHZ fastening schedule, and provide the documentation your insurer requires for surcharge removal.
What Door Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Standard fiberglass entry door | $1,800-$3,200 |
| Impact-rated entry door (HVHZ) | $3,500-$6,500 |
| Premium impact entry with decorative glass | $5,000-$8,500 |
Do I need HOA approval for a new front door in Coral Springs?
Yes, in nearly every neighborhood. We include HOA packet preparation in our measured survey - color samples, panel profile drawings, and glass pattern specs - so your board review moves in parallel with county permitting, not after. Call (754) 254-7558 and we’ll review your HOA covenants at no charge.
What’s the difference between impact-rated and standard entry doors?
Impact-rated doors carry a Miami-Dade NOA or Florida Product Approval for HVHZ zones and include laminated glass that resists wind-borne debris; standard doors meet basic structural loads but not impact requirements. In Coral Springs, impact-rated is required for replacement and typically necessary for insurance compliance. Call (754) 254-7558 for a written comparison.
Energy-Efficient Windows in Coral Springs
Energy-efficient window replacement in Coral Springs targets the original single-pane aluminum units that dominate the 1968-1992 housing stock, where summer attic temperatures exceed 140°F and afternoon thunderstorms drive humidity through failed weatherstripping. We specify low-E coatings, argon gas fill, and warm-edge spacers calibrated to South Florida’s cooling-dominated climate, not northern heating loads. Energy-Efficient Windows explains the full specification process.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms exceed 85°F by 4 PM despite the AC running, or you see faded flooring and upholstery near windows that receive direct sun.
What it costs in Coral Springs
Low-E/argon upgrade on standard vinyl window: $150-$300 per opening above base price; on impact-rated units: $200-$400 per opening above base price.
How we do it
We measure the solar heat gain coefficient target for each facade, specify the appropriate low-E coating from our manufacturer lines, verify argon fill at factory, and test the U-factor and SHGC with a laser meter at completion to confirm performance.
ENERGY STAR Replacement Windows
Signs you need it
Your FPL bill runs $350+ in summer months, or you’re replacing windows and want documented efficiency performance for resale or tax documentation.
What it costs in Coral Springs
ENERGY STAR certified vinyl window system: $850-$1,400 per opening installed; impact-rated ENERGY STAR system: $1,500-$2,600 per opening installed.
How we do it
We verify the NFRC label matches the South Florida climate zone, install with complete air-sealing package including backer rod and low-expansion foam, and provide the ENERGY STAR documentation and measured performance data for your records.
What Energy-Efficient Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Low-E/argon upgrade (standard window) | +$150-$300 per opening |
| Low-E/argon upgrade (impact window) | +$200-$400 per opening |
| ENERGY STAR impact-rated system | $1,500-$2,600 per opening |
Will energy-efficient windows lower my FPL bill in Coral Springs?
Yes, typically 12-25% on cooling loads for homes with original single-pane aluminum units, though actual savings depend on duct condition, insulation, and thermostat habits. We measure your current U-factor and air leakage at the survey so the projection is specific to your home, not a generic claim. Call (754) 254-7558 for a written savings estimate.
Do energy-efficient windows qualify for rebates in Florida?
FPL periodically offers window rebates through its Home Energy Survey program; we document the NFRC ratings and installation details required for submission, but rebate availability changes quarterly. Call (754) 254-7558 and we’ll check current programs during your estimate.
Impact Garage Doors in Coral Springs
Impact garage door replacement in Coral Springs addresses a vulnerability that many homeowners overlook: the garage door is the largest opening in most homes and the most common point of failure during a hurricane. Original doors from the 1970s-1990s construction era are uninsulated, non-impact-rated, and mounted on tracks that cannot carry wind loads required by current HVHZ standards. We measure the opening, specify wind-load-rated systems from PGT and other verified lines, and coordinate the structural connection details that county inspectors verify. Impact Garage Doors covers the full specification and installation protocol.
Hurricane-Rated Garage Doors
Signs you need it
The door flexes visibly in wind gusts, the track is mounted with lag bolts into drywall rather than structural framing, or your insurer has required impact-rated garage door documentation.
What it costs in Coral Springs
Single-car hurricane-rated steel door with wind-load track system: $2,200-$4,000 installed; double-car hurricane-rated door: $3,500-$6,000 installed.
How we do it
We verify the wind speed rating for your specific Coral Springs address, specify the door and track system with matching NOA, install with continuous angle and structural fasteners to the header and jambs, and photograph the connection details for your permit closeout and insurance documentation.
Wind-Load Code Compliance
Signs you need it
You’re selling the home and the buyer’s inspection flagged the garage door as non-compliant, or you’re completing a whole-home impact upgrade and the garage is the remaining gap.
What it costs in Coral Springs
Wind-load retrofit of existing door with reinforced track and hardware: $800-$1,800; full replacement with code-compliant system: $2,200-$6,000 depending on size and insulation.
How we do it
We pull the permit with the specific wind speed and exposure category for your property, install to the HVHZ fastening schedule, and schedule the county inspection with the NOA and installation photographs present.
What Impact Garage Doors Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Single-car hurricane-rated door | $2,200-$4,000 |
| Double-car hurricane-rated door | $3,500-$6,000 |
| Wind-load retrofit (existing door) | $800-$1,800 |
Does my garage door need to be impact-rated if my windows already are?
Yes, for full insurance compliance and HVHZ code adherence. A non-rated garage door creates a breach point that pressurizes the structure and can fail the windows from inside. We assess the entire envelope and document the gap if the garage door is the remaining vulnerability. Call (754) 254-7558 for a whole-home impact assessment.
Can I keep my existing garage door and just reinforce it?
Sometimes, if the door panel itself is structurally sound and the manufacturer offers a wind-load retrofit kit with NOA documentation. We inspect the panel, track, and spring system before recommending retrofit versus replacement, and we put that evaluation in writing. Call (754) 254-7558 for an inspection.
Custom & Geometric Windows in Coral Springs
Custom and geometric window installation in Coral Springs serves the architectural detail work that distinguishes homes in planned communities like Kensington Commons, where gable-end windows, arched transoms, and octagonal accent units are part of the original design vocabulary. These openings present unique challenges: they must replicate or improve the original sightline while meeting HVHZ impact standards, and they almost always require HOA board approval for any deviation from the original profile. We template the opening in person, specify from ViewLux and other custom-capable lines, and submit the shop drawings for both county and HOA review. Custom & Geometric Windows details our templating and approval process.
Geometric & Shaped Windows
Signs you need it
The original trapezoid, octagon, or triangular window has fogged between panes, the frame has separated at the miter joints, or you’re remodeling and want to match the existing geometric vocabulary.
What it costs in Coral Springs
Standard geometric shape in vinyl with insulated glass: $900-$1,800 installed; impact-rated geometric with laminated glazing: $1,800-$3,500 installed.
How we do it
We build a full-scale template on site, verify the rough opening is true to within 1/8 inch, submit shop drawings with the NOA to Broward County and the HOA architectural review, and install with custom flashing kits fabricated to the specific angle and radius.
Arched & Curved Windows
Signs you need it
The arched transom above your entry or the radius-top window in the stairwell has cracked glazing, or the original wood frame has rotted at the curve where water collects.
What it costs in Coral Springs
Fixed arched window with insulated glass: $1,200-$2,400 installed; operable arched or radius-top with impact rating: $2,500-$4,500 installed.
How we do it
We measure the springline, rise, and radius with a digital template, specify the curved frame from a manufacturer with HVHZ approval for that specific radius range, and coordinate the structural support at the header before installation to prevent deflection under wind load.
What Custom & Geometric Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Standard geometric shape (vinyl, insulated) | $900-$1,800 |
| Impact-rated geometric | $1,800-$3,500 |
| Operable arched/radius-top (impact-rated) | $2,500-$4,500 |
How long does custom window approval take in Coral Springs?
Typically 4-8 weeks for both Broward County and HOA review running in parallel, assuming the shop drawings are complete and the NOA is current. We prepare both submission packages from the same template data to prevent the sequential delays that stretch projects to 12+ weeks. Call (754) 254-7558 and we’ll review your HOA’s typical turnaround.
Can you match my existing grid pattern on a custom shape?
Yes, we template the existing sightline including muntin width, profile, and spacing, then specify from manufacturers like ViewLux that maintain custom grid capability for HVHZ-rated units. The match is documented in the shop drawing you approve before fabrication. Call (754) 254-7558 for a template appointment.
Brands We Service in Coral Springs
We install and service eight verified manufacturer lines in Coral Springs: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each is specified by performance tier and price range for the opening, not by margin. We stock common hardware, rollers, and weatherstripping locally, and most non-stock parts arrive within 5-7 business days. See our brands for full specifications and warranty terms.
Pricing for Windows & Doors in Coral Springs, FL
| Service | Typical range in Coral Springs |
|---|---|
| Standard vinyl single hung window | $650-$950 per opening |
| Impact-rated single/double hung window | $1,200-$2,100 per opening |
| Impact-rated horizontal roller window | $1,400-$2,400 per opening |
| Standard fiberglass entry door | $1,800-$3,200 |
| Impact-rated entry door (HVHZ) | $3,500-$6,500 |
| Low-E/argon upgrade (standard window) | +$150-$300 per opening |
| Low-E/argon upgrade (impact window) | +$200-$400 per opening |
| ENERGY STAR impact-rated window system | $1,500-$2,600 per opening |
| Single-car hurricane-rated garage door | $2,200-$4,000 |
| Double-car hurricane-rated garage door | $3,500-$6,000 |
| Impact-rated geometric window | $1,800-$3,500 |
| Operable arched/radius-top window (impact) | $2,500-$4,500 |
Prices in Coral Springs push toward the upper end when we encounter corroded aluminum frames requiring sill replacement, when HOA architectural review demands premium finishes or custom grid patterns, or when the home sits in an exposure category requiring higher wind-load ratings. Haven Clause 1 means the measured survey and the written quote are the same document - the price you receive before work starts is the price on the final invoice.
Neighborhoods We Serve in Coral Springs
We work across Coral Springs’s full residential core, from the master-planned sections near West Sample Road to the townhome clusters along State Road 7. Crews are dispatched from our South Florida office and typically arrive within scheduled windows without multi-day delays.
- Kensington Commons
- Ramblewood
- Cypress Run
- Maplewood
- Coral Springs Country Club area
Service Area - Cities Near Coral Springs
Our crews serve the full Broward County HVHZ corridor. We regularly coordinate permits and installations in Margate, FL, where many homes share Coral Springs’s 1970s-1980s construction era and aluminum window stock; Coconut Creek, FL, with its mix of townhome and single-family developments; Pompano Beach, FL, where coastal exposure categories add salt-air considerations to impact specifications; and Plantation, FL, with its own active HOA landscape and HVHZ compliance requirements. Each city maintains distinct permitting timelines and HOA densities that we track separately.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coral Springs
Broward County building permits typically clear in 2-3 weeks for standard window and door replacements with complete NOA documentation, but Coral Springs’s active HOA landscape adds a parallel review that often extends the total timeline to 4-6 weeks. We prepare both submission packages from the same measured survey so the reviews run concurrently, not back-to-back.
We prepare and submit the Broward County building permit with all HVHZ documentation, and we provide the HOA packet - color samples, frame profiles, grid drawings, and manufacturer spec sheets - in the format your specific board requires. We do not attend HOA meetings on your behalf, but we format the submission to match their typical approval workflow.
Your most recent insurance declaration page if you’ve received a surcharge notice, your HOA covenants if you have them, and any prior estimates you’d like us to review under our Free Second Opinion policy. We measure every opening during the visit, so access to all rooms with exterior walls is helpful. Call (754) 254-7558 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Springs Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.