Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Pompano Beach, FL
Window installation in Pompano Beach starts with HVHZ code compliance, not product preference. Every opening we measure in Broward County’s High-Velocity Hurricane Zone must carry Miami-Dade NOA approval or meet Florida Building Code HVHZ provisions, a stricter standard than neighboring Palm Beach County cities just miles north. We install and replace windows and doors across Pompano Beach’s mix of 1950s-1970s CBS homes, aging canalfront condominiums, and new A1A corridor construction, and every job begins with a measured survey you keep and a written price that does not change. Call (754) 254-7558 to schedule your free estimate.
Why Pompano Beach Homes Are Different
Pompano Beach sits in Broward County’s High-Velocity Hurricane Zone, where 175+ mph design pressures are mandatory and Miami-Dade NOA approval is the baseline for every window and door installation. This is a significantly stricter standard than neighboring Palm Beach County cities like Boca Raton or Delray Beach, and it shapes every product we specify and every attachment method we use.
The city’s dense network of navigable canals pushes salt-laden air deep into residential streets far from the oceanfront. In neighborhoods like Pompano Isles and Cypress Harbour, we regularly find aluminum frames, sill pans, and door hardware corroding at rates that cut product lifespans well below manufacturer estimates. The housing stock compounds the challenge: original single-pane aluminum jalousie and sliding windows in 1960s CBS block buildings and oceanfront condos are entirely non-compliant with current HVHZ requirements, and when a canalfront condo association pulls a Broward County permit, inspectors frequently flag the entire building’s remaining non-impact units, triggering association-wide replacement contracts that keep crews on multi-month jobs where original aluminum frames are embedded directly into block with no standard rough opening.
Our Main Pompano Beach Services
Most Pompano Beach homeowners who call us start with one of these two needs: replacing failed original windows in aging CBS homes or upgrading to HVHZ-compliant impact products before the next storm season.
Window Replacement in Pompano Beach
Window replacement in Pompano Beach means removing original single-pane aluminum units from 1950s-1970s CBS construction and installing NOA-approved impact or energy-efficient windows that meet HVHZ provisions. We measure every rough opening, document frame embed conditions in block walls, and specify products from PGT, CGI, CWS, and ES Windows rated for 175+ mph design pressures. Window Replacement in Pompano Beach covers the full scope, from single-unit residential to association-wide condo contracts.
Impact Windows & Doors in Pompano Beach
Impact windows and doors in Pompano Beach are not an upgrade; they are code. Every product must carry Miami-Dade NOA or Florida Product Approval with HVHZ notation, and every installation must pass Broward County inspection. We specify laminated glass, reinforced frames, and buck attachment methods that satisfy HVHZ structural calculations, with written documentation for association boards and property managers. Impact Windows & Doors in Pompano Beach details the product lines and approval documentation we provide.
Sliding & Patio Doors in Pompano Beach
Sliding and patio door replacement in Pompano Beach addresses the specific failure modes we see in canalfront and oceanfront properties: corroded rollers, failed weatherstripping, and single-pane glass that cannot meet current HVHZ standards. We measure track conditions, assess sill pan drainage, and specify multi-point locking impact-rated systems from ECO Window Systems and ViewLux with full NOA documentation. Sliding & Patio Doors in Pompano Beach covers the full product range and installation protocol.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Pompano Beach
Window installation in Pompano Beach requires more than product selection; it requires code literacy. Every opening in Broward County’s HVHZ must demonstrate Miami-Dade NOA or Florida HVHZ approval, and the city’s aging CBS housing stock, much of it built in the 1950s-1970s with original aluminum frames embedded directly into block, presents rough-opening conditions that do not match modern manufacturer’s specifications. We begin every Window Installation with a measured survey you keep, document frame embed depth and block condition, and specify products and attachment methods that satisfy both the written quote and the final inspection.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum hung windows that rattle in wind, show salt corrosion at the check rails, or no longer stay open without a prop are the units we replace most often in Pompano Beach’s 1960s CBS homes.
What it costs in Pompano Beach
Single and double hung window installation in Pompano Beach typically runs $650-$1,400 per opening depending on impact rating, frame material, and whether the original frame is embedded in block requiring demo and buck reconstruction.
How we do it
We remove the existing unit, assess block embed depth, install a pressure-treated or aluminum buck if needed, flash with self-adhered membrane, set the new NOA-approved hung window, insulate with backer rod and sealant, and document with photos before Broward County inspection.
Horizontal Roller Windows
Signs you need it
Roller windows with corroded tracks, cracked rollers, or single-pane glass that has separated from the frame are common in Pompano Beach’s original 1970s condo inventory, especially along canalfront buildings.
What it costs in Pompano Beach
Horizontal roller window installation in Pompano Beach typically ranges $750-$1,550 per opening, with higher figures for impact-rated laminated glass and stainless steel hardware specified for salt-air exposure.
How we do it
We measure track width and sill pan condition, specify the roller configuration and load rating for the opening size, install with integrated sill pan flashing, adjust roller tension for smooth operation, and leave a documented photo record of the completed installation.
What Window Installation Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Single hung window, vinyl frame, impact-rated | $650-$1,100 |
| Double hung window, aluminum frame, impact-rated | $850-$1,400 |
| Horizontal roller window, impact-rated with stainless hardware | $750-$1,550 |
Do you pull permits for window installation in Pompano Beach?
Yes. Every window installation in Pompano Beach requires a Broward County building permit with HVHZ compliance documentation, and we pull the permit, schedule inspection, and pass it before final payment. Call (754) 254-7558 and we’ll confirm permit status for your specific property.
Will the price change once window work starts?
No. Haven Clause 1 means the measured survey and the written quote are the same document; if we encounter embedded frames or block conditions we did not anticipate, that is our variance, not yours. Call (754) 254-7558 for a written estimate with no change-order clause.
Door Installation in Pompano Beach
Door installation in Pompano Beach faces the same HVHZ mandate as windows, with the added complexity of operable hardware and multi-point locking systems that must resist 175+ mph wind loads. The city’s salt-air penetration, driven by canal networks reaching deep inland, corrodes hinges, locks, and threshold assemblies at rates we document in every measured survey. We install and replace entry, patio, and storm doors across Pompano Beach’s housing stock, from single-family CBS homes to oceanfront condo towers, and every Door Installation begins with the written price you keep.
Hurricane-Proof Front & Entry Doors
Signs you need it
Entry doors with corroded hinges, failed weatherstripping, single-pane decorative glass, or frames that flex when pressure is applied are non-compliant with HVHZ and common in pre-1980 Pompano Beach homes.
What it costs in Pompano Beach
Hurricane-proof front and entry door installation in Pompano Beach typically runs $1,800-$4,500 including frame, impact-rated slab or decorative glass, multi-point lock, and threshold with integrated sill pan.
How we do it
We remove the existing frame, assess rough opening and buck condition in CBS block, install pressure-treated or aluminum buck if needed, set the NOA-approved pre-hung unit with three-point locking, shim and secure to structural framing, seal with backer rod and sealant, and document with photos.
French & Double Doors
Signs you need it
French doors with sagging frames, failed astragal seals, or single-pane glass that does not meet HVHZ are frequent in Pompano Beach’s 1970s-1980s patio additions and canalfront living spaces.
What it costs in Pompano Beach
French and double door installation in Pompano Beach typically ranges $2,400-$5,500 depending on width, impact rating, and whether the existing header requires reinforcement for the increased wind load.
How we do it
We measure opening width and header span, specify the appropriate jamb depth and reinforcement for HVHZ loads, install with multi-point locking and adjustable hinges, align active and inactive panels for proper seal compression, and leave a documented photo record.
What Door Installation Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Hurricane-proof entry door, impact-rated with multi-point lock | $1,800-$4,500 |
| French door pair, impact-rated, aluminum frame | $2,400-$5,500 |
| Storm door, non-impact, replacement only | $800-$1,600 |
Do I need an impact-rated door in Pompano Beach?
Yes. HVHZ code requires impact-rated doors for all exterior openings, and Broward County inspectors enforce this for replacements, not just new construction. Call (754) 254-7558 and we’ll verify the rating on any product you’re considering.
How long does door installation take in Pompano Beach?
Most single entry door installations complete in one day; French and double door systems with header reinforcement may require two days plus inspection scheduling. Call (754) 254-7558 for a written timeline with your estimate.
Energy-Efficient Windows in Pompano Beach
Energy-efficient windows in Pompano Beach solve a problem that impact-rated products alone do not address: solar heat gain through single-pane glass that drives cooling loads year-round in a subtropical climate. The city’s 1950s-1970s housing stock, much of it still fitted with original aluminum jalousie and sliding windows, leaks conditioned air and admits infrared radiation that HVAC systems work overtime to counter. We specify Energy-Efficient Windows with Low-E coatings, argon gas fill, and SHGC values selected for south Florida’s cooling-dominated climate, not northern heating-load assumptions.
Low-E & Argon Gas Glass
Signs you need it
Rooms with south or west exposure that overheat by midday, fading on floors and furnishings near windows, or condensation between panes on “insulated” units that have lost their seal indicate failed or absent Low-E and gas fill.
What it costs in Pompano Beach
Low-E and argon gas glass upgrade in Pompano Beach typically adds $80-$180 per opening to the base window cost, with full replacement of failed insulated units running $550-$1,200 depending on size and frame condition.
How we do it
We measure visible transmittance and SHGC requirements for each exposure, specify the appropriate Low-E coating stack and argon fill percentage, verify gas retention with manufacturer certification, and document U-factor and SHGC values on the written quote for utility rebate applications.
ENERGY STAR Replacement Windows
Signs you need it
Original single-pane aluminum windows with no thermal break, or early replacement vinyl units with yellowed glass and failed edge seals, are the units we replace most often in Pompano Beach’s 1960s-1970s CBS homes seeking utility bill reduction.
What it costs in Pompano Beach
ENERGY STAR replacement window installation in Pompano Beach typically ranges $700-$1,450 per opening for vinyl or aluminum frames with dual-pane Low-E argon glass, with impact-rated ENERGY STAR units at the higher end.
How we do it
We conduct a measured survey including orientation and shading analysis, specify ENERGY STAR certified products with south climate zone ratings, install with complete air sealing and insulation, and provide the NFRC label documentation you need for rebate programs.
What Energy-Efficient Windows Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Low-E argon upgrade, existing frame retained | $550-$1,200 |
| ENERGY STAR replacement window, vinyl frame | $700-$1,250 |
| ENERGY STAR impact-rated replacement window | $950-$1,450 |
Will energy-efficient windows lower my bill in Pompano Beach?
Yes. In Pompano Beach’s cooling-dominated climate, reducing solar heat gain with Low-E and proper SHGC selection typically cuts cooling load by 15-25% in homes with original single-pane aluminum windows. Call (754) 254-7558 for a measured survey with projected savings.
Are ENERGY STAR windows required in Pompano Beach?
Not by code, but by economics: the incremental cost over non-certified products is typically recovered in 3-5 years of reduced cooling costs, and some utility rebate programs require certification. Call (754) 254-7558 and we’ll review current rebate eligibility with your estimate.
Impact Garage Doors in Pompano Beach
Impact garage doors in Pompano Beach are a code requirement that many homeowners discover only after a failed inspection or association mandate. The city’s HVHZ classification means every garage door must meet wind-load ratings for 175+ mph, and the salt-air corrosion that attacks window frames is equally destructive to garage door springs, tracks, and hardware. We install Impact Garage Doors with NOA-approved wind-load reinforcement, impact-rated glazing where specified, and hardware rated for coastal exposure, with the written price and photo documentation standard on every job.
Hurricane-Rated Garage Doors
Signs you need it
Garage doors that flex visibly in wind, have no wind-load sticker or NOA documentation, or were installed before 2002 when HVHZ garage door standards were significantly tightened, require replacement for code compliance.
What it costs in Pompano Beach
Hurricane-rated garage door installation in Pompano Beach typically runs $1,400-$3,200 for a standard 16-foot residential sectional door with wind-load reinforcement, impact-rated windows if specified, and new track and spring assembly.
How we do it
We measure opening size and header condition, specify the wind-load rating and reinforcement strut configuration for the exposure, install with heavy-duty track and spring system rated for coastal cycles, attach the NOA label in the required location, and document with photos for inspection.
Wind-Load Code Compliance
Signs you need it
Broward County inspection failures, association compliance notices, or insurance policy requirements for documented wind-load resistance on garage doors trigger this service in Pompano Beach’s condo and HOA properties.
What it costs in Pompano Beach
Wind-load code compliance retrofit in Pompano Beach typically ranges $800-$2,000 for reinforcement of existing doors that can be upgraded, or $1,400-$3,200 for full replacement if the door cannot meet current HVHZ standards.
How we do it
We inspect the existing door for upgrade potential, calculate required wind-load based on exposure and opening size, install reinforcement struts, upgraded track, and hardware if the door qualifies, or specify and install a compliant replacement unit with full documentation for the building department.
What Impact Garage Doors Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Hurricane-rated garage door, 16 ft, with wind-load reinforcement | $1,400-$3,200 |
| Wind-load retrofit, existing door with reinforcement struts | $800-$2,000 |
| Impact-rated garage door window inserts | $200-$450 per insert |
Does my garage door need to be impact-rated in Pompano Beach?
Yes. HVHZ code requires wind-load rated garage doors for all residential and commercial structures, and Broward County enforces this for replacements and additions. Call (754) 254-7558 and we’ll verify your current door’s rating from the existing label or documentation.
Can you upgrade my existing garage door or does it need full replacement?
Some pre-2002 doors can be retrofitted with reinforcement struts, upgraded track, and hardware to meet current wind-load requirements; others lack the structural integrity and require full replacement. Call (754) 254-7558 for an inspection and written recommendation with both options priced.
Custom & Geometric Windows in Pompano Beach
Custom and geometric windows in Pompano Beach serve two distinct needs: the architectural restoration of 1950s-1970s homes with original shaped openings, and the design-forward specifications of new A1A corridor construction requiring commercial-grade impact curtain wall and storefront glazing. Both demand the same HVHZ compliance as standard rectangles, with the added complexity of engineering curved or angled frames for 175+ mph wind loads. We fabricate and install Custom & Geometric Windows with NOA-approved radius and polygon configurations, documented structural calculations, and the written price before fabrication begins.
Geometric & Shaped Windows
Signs you need it
Original trapezoid, octagon, or triangular windows in 1960s-1970s Pompano Beach homes with failed seals, single-pane glass, or aluminum frames that no longer seal against the block are common triggers for geometric replacement.
What it costs in Pompano Beach
Geometric and shaped window installation in Pompano Beach typically ranges $1,200-$3,500 per opening depending on polygon complexity, impact rating requirements, and whether the original frame is embedded in CBS block requiring custom buck fabrication.
How we do it
We field-measure every angle and radius with digital templates, engineer the frame extrusion and glazing package for HVHZ loads on non-rectangular geometry, fabricate with NOA-approved configurations, install with custom flashing for irregular perimeters, and document with photos showing sealant continuity at all joints.
Arched & Curved Windows
Signs you need it
Arched windows with sagging radius frames, cracked curved glass, or failed sealant at the spring line are frequent in Pompano Beach’s 1970s Mediterranean-influenced homes and newer custom construction alike.
What it costs in Pompano Beach
Arched and curved window installation in Pompano Beach typically runs $1,800-$4,200 per opening, with pricing driven by radius tightness, impact-rated laminated curved glass availability, and the structural reinforcement required for wind-load transfer on non-rectilinear shapes.
How we do it
We create a full-size template of the existing arch or curve, specify the radius-capable frame system and tempered or laminated curved glass, engineer attachment points for HVHZ load paths that differ from rectangular windows, install with continuous sealant at the spring line and radius, and leave documented evidence of structural connection.
What Custom & Geometric Windows Costs in Pompano Beach
| Item | Typical range in Pompano Beach |
|---|---|
| Geometric shaped window, impact-rated, standard polygon | $1,200-$3,500 |
| Arched window, impact-rated with curved glass | $1,800-$4,200 |
| Oversized custom opening, engineering and fabrication | $3,500-$8,000 |
Can you match my home’s original geometric windows with impact-rated replacements?
Yes. We field-template the existing opening, fabricate to match sightlines and muntin patterns, and specify impact-rated glazing with NOA approval for the exact geometry; the finished unit meets HVHZ code while preserving the original architectural intent. Call (754) 254-7558 to schedule template measurement.
Do custom windows take longer to install in Pompano Beach?
Fabrication typically adds 4-8 weeks to standard lead times, and Broward County requires engineered submittals for non-standard geometries that we prepare and submit as part of our scope. Call (754) 254-7558 for a written timeline with your measured survey.
Brands We Service in Pompano Beach
We specify from eight manufacturer lines in Pompano Beach: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each is selected by performance tier and price range for the specific opening, not by margin. We stock common hardware and repair parts locally, and most non-custom orders ship within 2-3 weeks. See our brands for full specifications and NOA documentation.
Pricing for Windows & Doors in Pompano Beach, FL
| Service | Typical range in Pompano Beach |
|---|---|
| Single hung window, vinyl frame, impact-rated | $650-$1,100 |
| Double hung window, aluminum frame, impact-rated | $850-$1,400 |
| Horizontal roller window, impact-rated with stainless hardware | $750-$1,550 |
| Hurricane-proof entry door with multi-point lock | $1,800-$4,500 |
| French door pair, impact-rated, aluminum frame | $2,400-$5,500 |
| Low-E argon upgrade, existing frame retained | $550-$1,200 |
| ENERGY STAR replacement window, vinyl frame | $700-$1,250 |
| Hurricane-rated garage door, 16 ft, with wind-load reinforcement | $1,400-$3,200 |
| Geometric shaped window, impact-rated, standard polygon | $1,200-$3,500 |
| Arched window, impact-rated with curved glass | $1,800-$4,200 |
Prices in Pompano Beach increase when original frames are embedded in CBS block requiring demo and buck reconstruction, when HVHZ engineering submittals are required for non-standard geometries, and when stainless steel hardware is specified for maximum salt-air resistance. Haven Clause 1 means the price we write before work starts is the price on the final invoice; no change orders, no surprises.
Neighborhoods We Serve in Pompano Beach
We install and replace windows and doors across Pompano Beach, from the beachfront A1A corridor to inland canalfront communities. Crews are dispatched from our Miami office and typically arrive within scheduled windows across the Pompano Beach service area.
- Pompano Isles
- Cypress Harbour
- Collier Manor
- Cresthaven
- Harbor Village
Service Area - Cities Near Pompano Beach
We serve the full Broward County HVHZ corridor, with crews working daily in Coconut Creek, FL, Margate, FL, Deerfield Beach, FL, and Fort Lauderdale, FL. Every city in our service area receives the same Haven Standard: written price before work, verified crew, documented photo record, and 365-Day Done Right Promise.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Pompano Beach
Yes. Our live phone coverage operates 24/7, and for genuine emergency situations including storm damage and security-compromised openings, we dispatch crews as scheduling allows with temporary protection and permanent replacement scoped on the same visit. Call (754) 254-7558 at any hour; a live person answers.
Most Pompano Beach condo associations and HOAs require architectural review and proof of Miami-Dade NOA or Florida HVHZ approval before permitting installation to begin. We provide the full documentation package, including manufacturer specifications, installation method statements, and insurance certificates, as standard scope on every job.
Call (754) 254-7558; a live person will answer, confirm your address and service need, and schedule a measured survey at your Pompano Beach property. You keep the survey document, and we return a written quote that cannot differ from it. Estimates are free, and we offer a free second opinion on any competitor’s written estimate you bring us.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pompano Beach Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B.