Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Davie, FL
Window installation in Davie typically runs $650-$1,400 per opening for standard vinyl impact-rated units, with most single-story ranch homes needing 8-14 openings replaced. Door installation ranges from $1,200 for a standard entry replacement to $4,500+ for hurricane-rated French or custom wide-format systems on equestrian properties. Call (754) 254-7558 to schedule your free measured survey - the written quote we produce is the same document that governs the installation.
Davie’s housing stock creates a specific kind of window and door work. The town’s concentration of 1970s-80s CBS ranch homes with original single-pane aluminum jalousie and slider windows sits alongside active equestrian zoning that produces oversized barn openings and equipment-width doorways you won’t find in neighboring Pembroke Pines or Weston. At home, we specify products from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - matched to what each opening requires, not to what we have in stock.
Why Davie Homes Are Different
Davie is Broward County’s only municipality with active equestrian zoning woven through residential neighborhoods. Contractors here regularly encounter ranch-style properties with barn openings sized for livestock equipment, wide carport entries built for horse trailers, and agricultural outbuildings - non-standard door work essentially absent in Weston or Cooper City. Along Davie Road and SW 64th Avenue, we’ve measured 18-to-20-foot rough openings where the original owner designed a garage to pull a trailer straight through; these require custom or paired impact doors and a commercial-grade permit track rarely seen on single-family jobs elsewhere in Broward.
The other half of Davie’s market is its large stock of 1970s-80s CBS ranch homes with original single-pane aluminum jalousie or slider windows. The combination of year-round high humidity and proximity to the Everglades wetland edge accelerates oxidation and frame seal failure on these original units. Though inland, Davie sits in Broward’s wind-borne debris region and takes the full track of Atlantic hurricanes between Miami and Palm Beach, making Florida Building Code-compliant impact windows and reinforced door systems mandatory for any permitted replacement.
Our Main Davie Services
These are the two services Davie homeowners call about most, with sliding and patio doors running a close third.
Window Replacement in Davie
Most Davie window replacement calls come from owners of 1970s-80s CBS ranch homes whose original single-pane aluminum jalousie or horizontal slider windows have reached end of service life. The masonry construction requires concrete anchors and proper buck framing for new impact-rated installations. We measure every opening to the sixteenth, document frame squareness and wall thickness, and specify products from our eight verified manufacturer lines. See our full Window Replacement in Davie page for measured-survey details and product tiers.
Impact Windows & Doors in Davie
Davie’s location in Broward’s wind-borne debris region means impact-rated products aren’t optional for permitted replacement work. We specify PGT, CGI, CWS, ES Windows, ECO Window Systems, and Mr-Glass impact lines by design pressure rating and exposure category, not by margin. Every installation includes documented photo evidence of anchor embedment and sealant bead continuity. Read more on our Impact Windows & Doors in Davie page.
Sliding & Patio Doors in Davie
Davie’s ranch homes often include original sliding glass doors with corroded rollers and failed weatherstripping, while equestrian properties need multi-panel systems for pool enclosures and barn access. We measure track depth, header load, and sill condition before specifying replacement or new construction. Details are on our Sliding & Patio Doors in Davie page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Davie
Window installation in Davie means working with two distinct housing types: the 1970s-80s CBS ranch homes with original single-pane aluminum windows that dominate the market, and the equestrian-zoned properties with oversized openings and non-standard configurations. Both require impact-rated products under Florida Building Code, and both benefit from a measured survey that records frame squareness, wall thickness, and anchor embedment depth before any product is ordered. Our Window Installation team draws from eight manufacturer lines to match the specification to the opening, not the other way around.
Single & Double Hung Windows
Signs you need it
The sashes no longer stay open without a prop, or you feel air movement at the meeting rail on original aluminum units.
What it costs in Davie
Standard vinyl impact-rated single or double hung windows in Davie typically run $650-$980 per opening installed, with wood-clad or composite frames reaching $1,100-$1,400.
How we do it
We remove the existing frame, inspect the buck for moisture damage, install new concrete anchors at 12-inch centers, square the frame with composite shims, and seal with backer rod and structural silicone before documenting the bead continuity with photos.
Horizontal Roller Windows
Signs you need it
The sash binds in the track, the rollers have flat-spotted, or you can see daylight at the meeting stile when closed.
What it costs in Davie
Horizontal roller replacement in Davie ranges from $720-$1,050 for standard sizes, with triple-track configurations or oversize ranch-style units running $1,150-$1,550.
How we do it
We measure track width and sill slope, specify the correct roller carrier and stainless steel track insert, set the frame with composite shims for positive drainage, and test operation under load before the customer signs the completion checklist.
What Window Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Single or double hung, vinyl impact-rated | $650-$980 |
| Horizontal roller, standard size | $720-$1,050 |
| Horizontal roller, triple-track or oversize | $1,150-$1,550 |
Do you pull permits for window replacement in Davie?
Yes. Every window installation in Davie requires a Broward County building permit and final inspection for Florida Building Code compliance; we pull the permit, schedule inspections, and provide the certificate of completion. Call (754) 254-7558 to schedule your free measured survey.
How long does window installation take in Davie?
Most Davie ranch homes see 8-14 openings completed in two to three working days, with equestrian properties or custom configurations adding time for specialty ordering. Call (754) 254-7558 for a timeline based on your measured survey.
Door Installation in Davie
Door installation in Davie spans standard residential entry replacement on 1970s-80s CBS ranch homes and complex wide-format work on equestrian-zoned properties with equipment-sized openings. The original single-family entries on Davie’s ranch stock are typically 32 or 36 inches, but horse-country properties along Davie Road and Orange Drive regularly present 8-to-10-foot singles or 18-to-20-foot paired openings that require commercial-grade hardware and a permit track most residential contractors haven’t encountered. Our Door Installation team measures rough opening, header load, and jamb depth before specifying from Therma-Tru, CGI, or custom-fabricated lines.
Entry Doors
Signs you need it
The slab is delaminating, the jamb is out of square, or the weatherstrip no longer compresses against the stop.
What it costs in Davie
Standard entry door replacement in Davie runs $1,200-$2,400 installed, with fiberglass impact-rated units at $2,800-$4,200.
How we do it
We measure rough opening to the quarter-inch, verify header capacity for the new unit weight, install composite shims at hinge locations, and seal with backer rod and structural silicone before testing latch engagement and deadbolt throw.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current door lacks a Miami-Dade NOA or Florida Product Approval, or the glass lite is not impact-rated.
What it costs in Davie
Impact-rated entry systems in Davie range from $2,800-$4,500 for standard sizes, with oversize or custom configurations reaching $5,500-$8,500.
How we do it
We specify the design pressure rating to the exposure category, document the NOA and Florida Product Approval numbers on the written scope, install with concrete anchors at code spacing, and photograph anchor embedment and sealant continuity for the job record.
What Door Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Standard entry door replacement | $1,200-$2,400 |
| Fiberglass impact-rated entry door | $2,800-$4,200 |
| Impact-rated entry, oversize or custom | $5,500-$8,500 |
Do equestrian properties need different doors in Davie?
Yes. Davie’s horse-country estates often have 18-to-20-foot rough openings for equipment access that require paired or custom impact doors with commercial-grade hardware and a specialized permit track. Call (754) 254-7558 for a measured survey of your opening.
Will the price change once door installation starts?
No. Haven Clause 1 requires the written quote to match the measured survey; if field conditions differ from what we documented, we stop and revise the scope with you before proceeding. Call (754) 254-7558 to schedule your free estimate.
Energy-Efficient Windows in Davie
Energy-efficient window replacement in Davie addresses the specific failure modes of 1970s-80s single-pane aluminum units: solar heat gain that overloads aging HVAC systems, and conductive losses through uninsulated frames during the brief but real South Florida cold snaps. The year-round high humidity combined with Everglades-proximity accelerates frame oxidation and seal degradation, meaning efficiency upgrades here need to solve both thermal performance and long-term durability. Our Energy-Efficient Windows specifications cite U-factor and SHGC values from the NFRC label, not marketing claims.
Low-E & Argon Gas Glass
Signs you need it
Your south- and west-facing rooms are 8-12 degrees warmer than the rest of the house, or you can feel radiant heat through the glass.
What it costs in Davie
Low-E with argon fill added to standard impact vinyl windows in Davie runs $780-$1,150 per opening, with high-performance triple-silver coatings reaching $1,250-$1,650.
How we do it
We specify the coating by orientation and SHGC target, verify argon fill with a spark test on delivery, and document the NFRC label values on the written scope for your records.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows are original single-pane aluminum, or your summer cooling bills exceed $280-$340 monthly for a 1,800-square-foot Davie ranch.
What it costs in Davie
ENERGY STAR-certified impact vinyl replacement windows in Davie range from $820-$1,250 per opening, with composite or fiberglass frames at $1,350-$1,850.
How we do it
We match the NFRC U-factor and SHGC to Davie’s climate zone, specify warm-edge spacers to reduce condensation at the glass perimeter, and include the ENERGY STAR label documentation in the photo record.
What Energy-Efficient Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Low-E with argon, standard impact vinyl | $780-$1,150 |
| Low-E with argon, high-performance coating | $1,250-$1,650 |
| ENERGY STAR impact vinyl replacement | $820-$1,250 |
Do energy-efficient windows really lower bills in Davie?
Yes. Replacing original single-pane aluminum units with Low-E argon-filled impact windows typically reduces cooling load 15-25% on Davie’s ranch homes, with payback in 6-10 years depending on HVAC age and insulation. Call (754) 254-7558 for a measured survey and written estimate.
What’s the difference between Low-E and tinted glass?
Low-E coatings reflect infrared heat while passing visible light; tint absorbs heat and can darken interiors. We specify Low-E for Davie’s orientation mix, with solar tint only where glare control is the primary need. Call (754) 254-7558 to review options.
Impact Garage Doors in Davie
Impact garage door installation in Davie serves two distinct property types: standard ranch homes with 16-foot openings needing wind-load-rated replacement, and equestrian-zoned properties with 18-to-20-foot custom widths built for trailer access. Both fall under Florida Building Code requirements for the High-Velocity Hurricane Zone, but the equestrian properties often lack the header documentation and engineered drawings that standard residential products assume. Our Impact Garage Doors team measures spring weight, track radius, and wind-load requirement before specifying from PGT, CGI, or custom-fabricated lines.
Hurricane-Rated Garage Doors
Signs you need it
Your current garage door lacks a Miami-Dade NOA, or the panels show oil-canning and the track is unbraced.
What it costs in Davie
Standard 16-foot hurricane-rated garage doors in Davie run $2,400-$3,800 installed, with custom wind-load upgrades or 20-foot widths reaching $4,500-$7,200.
How we do it
We calculate the design pressure from exposure category and door size, specify the correct track gauge and vertical reinforcement, install with engineered anchors to the header and jambs, and document the NOA and installation photos for the job record.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient wind-load documentation, or your existing door failed inspection for missing vertical reinforcement.
What it costs in Davie
Wind-load compliance upgrades on existing garage door systems in Davie range from $1,800-$3,200 for reinforcement and hardware, with full replacement to current code at $2,800-$5,500.
How we do it
We pull the applicable Florida Building Code wind-load map data for Davie’s exposure, specify the required design pressure and corresponding product approval, and submit the NOA and installation drawings with the permit application.
What Impact Garage Doors Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Standard 16-ft hurricane-rated garage door | $2,400-$3,800 |
| Custom or 20-ft hurricane-rated door | $4,500-$7,200 |
| Wind-load compliance upgrade, existing system | $1,800-$3,200 |
Can you install impact garage doors on equestrian properties in Davie?
Yes. We’ve engineered and permitted 18-to-20-foot impact garage doors on Davie equestrian properties, though these require structural review of the header, custom track fabrication, and a commercial-grade permit track. Call (754) 254-7558 for a measured survey.
Do impact garage doors require a permit in Davie?
Yes. All garage door replacement in Davie requires a Broward County building permit with wind-load documentation and final inspection; we pull permits and schedule inspections as standard. Call (754) 254-7558 to start the process.
Custom & Geometric Windows in Davie
Custom and geometric window installation in Davie fills the gap between standard product lines and the non-standard openings created by the town’s unique housing mix. Equestrian properties need tall, narrow barn windows and arched-top units above equipment doors; 1970s-80s ranch homes sometimes feature clerestory bands, octagonal accent windows, or radius-topped openings that original builders sourced from regional mills no longer operating. Our Custom & Geometric Windows team produces measured shop drawings before any glass is ordered, with sightline dimensions confirmed to the sixteenth.
Geometric & Shaped Windows
Signs you need it
You have a trapezoid, triangle, or octagonal window with fogged or cracked glass, or the frame has separated at the miter.
What it costs in Davie
Geometric replacement windows in Davie start at $1,400-$2,200 for standard shapes under 24 square feet, with complex multi-sided or compound radius units at $2,800-$4,500.
How we do it
We measure every angle with a digital protractor, produce CAD shop drawings for your approval, specify tempered or laminated glass as required by code, and fabricate to sightline dimensions with documented tolerances before installation.
Oversized Openings
Signs you need it
You have a window or glazed door opening exceeding 40 square feet, or a custom configuration that standard manufacturer lines do not catalog.
What it costs in Davie
Oversized custom windows in Davie range from $3,200-$5,500 for single units, with multi-panel systems or impact-rated oversize configurations reaching $6,500-$12,000.
How we do it
We engineer the header and sill for dead and live loads, specify the correct design pressure and glass thickness, coordinate fabrication with the manufacturer’s custom shop, and install with documented anchor embedment and sealant continuity.
What Custom & Geometric Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Geometric shape, standard size | $1,400-$2,200 |
| Geometric shape, complex or compound radius | $2,800-$4,500 |
| Oversized custom, single unit | $3,200-$5,500 |
How long do custom windows take to fabricate for Davie?
Standard geometric shapes from our verified manufacturer lines typically ship in 4-6 weeks; complex or oversized units requiring engineering review run 8-12 weeks. We provide the production schedule in writing with your quote. Call (754) 254-7558 to measure and specify.
Can you match existing custom windows on a Davie ranch home?
Yes. We measure sightlines, mullion profiles, and glass tint from your existing units, then specify from ViewLux or ECO Window Systems custom lines to match or document the variance if the original manufacturer is unavailable. Call (754) 254-7558 for a measured survey.
Brands We Service in Davie
We specify from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each is selected by performance tier and price range for the specific opening, not by margin. We stock common hardware and weatherstrip for faster turnaround on service calls. See our brands for full specifications and warranty terms.
Pricing for Windows & Doors in Davie, FL
| Service | Typical range in Davie |
|---|---|
| Single/double hung window, vinyl impact-rated | $650-$980 |
| Horizontal roller window, standard | $720-$1,050 |
| Horizontal roller, triple-track or oversize | $1,150-$1,550 |
| Standard entry door replacement | $1,200-$2,400 |
| Fiberglass impact-rated entry door | $2,800-$4,200 |
| Impact entry, oversize or custom | $5,500-$8,500 |
| Low-E with argon, standard impact vinyl | $780-$1,150 |
| ENERGY STAR impact vinyl replacement | $820-$1,250 |
| Standard 16-ft hurricane-rated garage door | $2,400-$3,800 |
| Custom or 20-ft hurricane-rated garage door | $4,500-$7,200 |
| Geometric window, standard shape | $1,400-$2,200 |
| Oversized custom window, single unit | $3,200-$5,500 |
Price drivers in Davie include masonry wall anchoring on CBS construction, custom or oversize openings on equestrian properties, and the design pressure upgrades required for Florida Building Code compliance. Haven Clause 1 means your written quote is produced from the measured survey before any work starts and does not change unless the scope changes.
Neighborhoods We Serve in Davie
We serve Davie from our Miami-area dispatch office, with crews scheduled to the western Broward corridor including these representative neighborhoods:
- Long Lake Ranches
- Ivanhoe
- Shenandoah
- Davie Ranch
- Forest Ridge
Most Davie appointments are scheduled within a 3-5 day window from the initial call.
Service Area - Cities Near Davie
Sightline crews work the full western Broward corridor from our South Florida dispatch office. We regularly serve Margate, FL, North Lauderdale, FL, Coconut Creek, FL, and Coral Springs, FL from the same measured-survey and installation teams that handle Davie properties.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Davie
Yes. All window and door replacement in Davie requires a Broward County building permit with Florida Building Code compliance, including impact ratings and proper anchoring documentation; we pull permits and schedule inspections on every job.
Davie’s equestrian and ranch-style communities often have architectural review boards that require product samples, color approval, and sightline documentation before work begins; we provide the submittal package as part of our standard process.
Yes. We schedule around barn operations, use dust containment, and coordinate with property managers for access to outbuildings and equipment structures; our crews are background-checked and identified by license number before arrival.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Davie Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B.