Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Wilton Manors, FL
Window and door installation in Wilton Manors runs $650-$4,200 per opening depending on product tier, with most CBS ranch homes built between the 1940s and 1960s requiring full-frame replacement rather than retrofit. The city’s island geography surrounded by the Middle River creates salt-air conditions that destroy aluminum frames and hardware faster than inland Broward cities, making material selection critical. Call (754) 254-7558 to schedule your free measured survey - the written price we leave with you is the price on the final invoice.
Why Wilton Manors Homes Are Different
Wilton Manors occupies a 2-square-mile island completely encircled by the Middle River and its canal system, which means virtually every residence here faces salt-laden, high-humidity air that attacks window frames and door hardware more aggressively than any landlocked Broward community. The housing stock is dominated by modest one-story concrete block structure ranch homes from the 1940s through 1960s, many still fitted with original jalousie windows or early single-pane aluminum sliders that are neither impact-rated nor energy-efficient.
This combination creates a specific contracting environment: full-frame replacement to hurricane-code standard is the defining job type, not repair. Jalousie windows - the louvered glass-slat style common on 1950s Florida homes - remain unusually prevalent and are flagged by most insurers as unprotected openings that void hurricane coverage. Contractors working Wilton Manors routinely encounter entire elevations of jalousies to replace in a single project, a volume rarely seen in newer Broward suburbs. Every replacement must meet Broward County’s mandatory impact-rated glazing requirements, and insurers actively inspect for non-compliant windows before issuing or renewing policies.
Our Main Wilton Manors Services
Most calls from Wilton Manors homeowners center on two needs: replacing original windows and doors that no longer meet hurricane code, and upgrading to energy-efficient systems that lower cooling loads in homes with minimal insulation. Here is where those jobs live on our site.
Window Replacement in Wilton Manors
Full-frame window replacement is the standard scope in Wilton Manors, where original jalousie and single-pane aluminum units fail both code and insurer requirements. We measure every opening to the nearest 1/8 inch, specify impact-rated replacement products from our verified manufacturer lines, and deliver a written scope before any work begins. Every completed job includes a documented photo record under the Haven Standard. Read more about Window Replacement in Wilton Manors.
Impact Windows & Doors in Wilton Manors
Broward County’s mandatory impact-rated glazing requirements make this the non-negotiable tier for Wilton Manors homes. We specify products by performance rating - large-missile impact resistance, design pressure, and water infiltration - matched to each opening’s exposure and height. The measured survey documents wind-zone requirements for your specific elevation. Read more about Impact Windows & Doors in Wilton Manors.
Sliding & Patio Doors in Wilton Manors
Patio door replacement in Wilton Manors addresses the same salt-air degradation that affects windows, with the added challenge of rolling hardware and track systems that corrode in canal-front humidity. We specify multi-point locking systems and stainless steel rollers rated for coastal exposure, with impact-rated glass packages that meet county code. Read more about Sliding & Patio Doors in Wilton Manors.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Wilton Manors
Window installation in Wilton Manors means full-frame replacement of original jalousie and early aluminum units in 1940s-1960s CBS ranch homes, with every product specified to Broward County’s impact-rated glazing requirements and the salt-air conditions of canal-front living. Our Window Installation process begins with a measured survey you keep, and the written quote derived from that document cannot change - Haven Clause 1 since 2012.
Single & Double Hung Windows
Signs you need it
Original jalousie windows that insurers flag as unprotected openings, or single-pane aluminum units with oxidized frames and failed balances that no longer stay open.
What it costs in Wilton Manors
Single and double hung window installation in Wilton Manors typically runs $850-$1,650 per opening for impact-rated vinyl or aluminum units, with multi-point locking hardware and Low-E glazing.
How we do it
We remove the entire frame including jamb liners and sill, inspect the rough opening for moisture damage common in canal-front homes, install the new unit with corrosion-resistant fasteners, foam-seal the perimeter, and finish with interior trim matched to existing casing.
Horizontal Roller Windows
Signs you need it
Sliding windows with corroded rollers that jump track, or original units with single-pane glass that rattles in wind and conducts heat at rates that drive cooling costs upward.
What it costs in Wilton Manors
Horizontal roller window installation in Wilton Manors typically runs $950-$1,850 per opening for impact-rated units with stainless steel rollers and multi-chamber vinyl or thermally broken aluminum frames.
How we do it
We measure the daylight opening to 1/8-inch tolerance, specify the roller system for salt-air exposure, install with integrated flashing to shed driving rain common on river-facing elevations, and operate-test the sash before documenting the completed installation.
What Window Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung Window (impact-rated, installed) | $850-$1,650 |
| Horizontal Roller Window (impact-rated, installed) | $950-$1,850 |
| Full-frame removal and disposal (per opening) | $180-$320 |
Do you pull permits for window installation in Wilton Manors?
Yes - we pull Broward County permits for every window installation that alters the opening or changes the product type, and we schedule inspections so the job closes properly. Call (754) 254-7558 to confirm permit status for your specific scope.
How long does window installation take in Wilton Manors?
Most Wilton Manors homes complete 8-12 openings in two to three days, with jalousie-to-modern conversions taking slightly longer due to frame preparation. Call (754) 254-7558 for a timeline based on your elevation count.
Door Installation in Wilton Manors
Door installation in Wilton Manors addresses the same salt-air degradation that accelerates hardware corrosion in canal-front homes, with the added requirement that every exterior door assembly meet Broward County’s impact-rated standards for windborne debris protection. Our Door Installation process specifies products by exposure - river-facing elevations receive upgraded hardware packages - and delivers a written price before any work begins.
Entry Doors
Signs you need it
Steel or fiberglass entry doors with swollen frames, corroded hinges, or failed weatherstripping that allows driving rain into the jamb, common on Middle River-facing homes.
What it costs in Wilton Manors
Entry door installation in Wilton Manors typically runs $1,850-$3,400 for impact-rated fiberglass or steel units with multi-point locking systems and composite jambs rated for salt-air exposure.
How we do it
We remove the existing unit and inspect the rough opening for moisture intrusion, install the new pre-hung door with corrosion-resistant screws and integrated sill pan, adjust strike locations for smooth operation, and seal with backer rod and sealant rated for joint movement.
Hurricane-Proof Front & Entry Doors
Signs you need it
Insurer requirements for large-missile impact-rated door assemblies, or existing doors with decorative glass inserts that do not meet Broward County’s glazing standards.
What it costs in Wilton Manors
Hurricane-rated front door installation in Wilton Manors typically runs $2,400-$4,200 for units with laminated impact glass, reinforced stiles, and design pressure ratings matched to the home’s wind zone.
How we do it
We verify the wind zone and exposure category from the measured survey, specify the door assembly with labeled impact-rated glass and hardware, install with continuous hinge reinforcement and three-point locking, and document the rating label for your insurance file.
What Door Installation Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Entry Door (impact-rated fiberglass/steel, installed) | $1,850-$3,400 |
| Hurricane-Rated Front Door (with impact glass, installed) | $2,400-$4,200 |
| Hardware upgrade to stainless steel (salt-air package) | $220-$380 |
Do I need a permit to replace my front door in Wilton Manors?
Yes - Broward County requires permits for any exterior door replacement that changes the frame or the door type, and we pull and close them as standard scope. Call (754) 254-7558 to verify your specific project requirements.
Can you match my existing interior trim around a new door?
We document existing casing profiles during the measured survey and specify matching or complementary trim; 1960s ranch homes in Wilton Manors typically feature simple 2¼-inch colonial casing we can replicate. Call (754) 254-7558 to review trim options.
Energy-Efficient Windows in Wilton Manors
Energy-efficient window installation in Wilton Manors targets the high cooling loads of 1940s-1960s CBS ranch homes with minimal wall insulation and original single-pane glass that conducts heat at rates far above modern standards. Our Energy-Efficient Windows process specifies glazing packages by orientation - west- and south-facing openings receive upgraded solar control - and documents U-factor and SHGC ratings on the written quote.
Low-E & Argon Gas Glass
Signs you need it
Rooms that overheat by mid-afternoon despite running air conditioning continuously, or utility bills that spike in summer months due to solar heat gain through uncoated single-pane glass.
What it costs in Wilton Manors
Low-E with argon gas upgrade in Wilton Manors typically adds $80-$140 per opening to the base window price, with payback periods of 4-7 years based on current FPL cooling rates.
How we do it
We specify the Low-E coating by climate zone - Broward requires southern-tier solar control - order insulated glass units with argon fill and warm-edge spacers, and document the NFRC label ratings on your warranty file.
ENERGY STAR Replacement Windows
Signs you need it
Homeowners seeking documented efficiency ratings for resale value or utility rebate programs, or replacing windows in homes that fail energy audits due to excessive air leakage.
What it costs in Wilton Manors
ENERGY STAR certified window installation in Wilton Manors typically runs $1,050-$1,950 per opening for impact-rated vinyl or composite units with U-factors below 0.30 and SHGC below 0.25.
How we do it
We verify the NFRC certification and ENERGY STAR climate zone compliance, install with complete air-sealing package including backer rod and low-expansion foam, and provide the efficiency documentation for your records.
What Energy-Efficient Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Low-E/Argon upgrade (per opening, added to base window) | $80-$140 |
| ENERGY STAR Impact Window (installed) | $1,050-$1,950 |
| Whole-home air sealing package (12+ openings) | $1,200-$2,100 |
Will energy-efficient windows lower my FPL bill in Wilton Manors?
Yes - most Wilton Manors homeowners see cooling-cost reductions of 12-18% after replacing single-pane aluminum with Low-E argon impact windows, with west-facing rooms showing the most improvement. Call (754) 254-7558 for a load calculation based on your home’s orientation.
Do energy-efficient windows still meet hurricane code in Wilton Manors?
Yes - every energy-efficient window we specify carries the same impact rating as our standard products; the Low-E coating and argon fill are added to laminated impact glass, not substituted for it. Call (754) 254-7558 to review the rating labels.
Impact Garage Doors in Wilton Manors
Impact garage door installation in Wilton Manors addresses a critical vulnerability: the garage door is the largest opening in most homes and the most common point of failure during hurricane events, yet many 1950s-1960s ranch homes still have non-rated sectional doors or original tilt-up units. Our Impact Garage Doors process specifies wind-load-rated sections with reinforced tracks and heavy-duty hardware, with the measured survey documenting opening size and exposure for proper design pressure selection.
Hurricane-Rated Garage Doors
Signs you need it
Non-rated sectional doors on homes built before 1994, or existing doors with no wind-load sticker that insurers flag during policy renewal inspections.
What it costs in Wilton Manors
Hurricane-rated garage door installation in Wilton Manors typically runs $2,200-$4,800 for a 16-foot double-wide with impact-rated sections, reinforced track, and heavy-duty torsion spring system rated for the opening weight.
How we do it
We measure the finished opening and verify headroom and side-room clearances, specify the door assembly with labeled wind-load rating and Miami-Dade or Florida Product Approval, install with reinforced vertical track and heavy-duty brackets, and tension the spring system to manufacturer specification.
Wind-Load Code Compliance
Signs you need it
Permit requirements for garage door replacement in Broward County, or engineer’s letters mandating specific design pressure ratings for homes in exposed wind zones.
What it costs in Wilton Manors
Wind-load code compliance upgrade in Wilton Manors typically runs $380-$720 added to the base door price for engineering documentation, permit fees, and inspection coordination.
How we do it
We verify the wind speed requirement from Broward County’s current code, specify the door with the corresponding design pressure rating, pull the permit, install to engineered drawings, and schedule inspection for final approval.
What Impact Garage Doors Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Hurricane-Rated Garage Door (16 ft, installed) | $2,200-$4,800 |
| Wind-Load Code Compliance Package | $380-$720 |
| Heavy-duty opener upgrade (rated for impact door weight) | $650-$1,200 |
Does my garage door need to be impact-rated in Wilton Manors?
Yes - Broward County requires all garage doors to meet wind-load and impact standards, and most insurers will not issue or renew policies without documentation of a rated assembly. Call (754) 254-7558 to verify your current door’s rating.
Can you install an impact garage door on a 1960s block home?
Yes - we retrofit impact-rated garage doors onto original 1950s-1960s Wilton Manors homes regularly, though some openings require header reinforcement or side-room modifications we document in the measured survey. Call (754) 254-7558 for an opening assessment.
Custom & Geometric Windows in Wilton Manors
Custom and geometric window installation in Wilton Manors serves homeowners updating 1940s-1960s ranch homes with architectural character that standard rectangular units cannot replicate, from arched openings above original entry doors to circular accent windows in gable ends. Our Custom & Geometric Windows process templates each shape from field measurements, with impact-rated laminated glass specified to the same standards as our operable units.
Geometric & Shaped Windows
Signs you need it
Original fixed geometric windows with failed seals or single-pane glass, or renovation projects that add triangular, trapezoidal, or circular openings for architectural interest.
What it costs in Wilton Manors
Geometric and shaped window installation in Wilton Manors typically runs $1,400-$3,200 per opening depending on complexity, with triangles and trapezoids at the lower end and circles or polygons at the upper end.
How we do it
We create a full-size template from the existing opening or architectural drawings, specify the impact-rated laminated glass with custom aluminum or vinyl frame, and install with integrated flashing compatible with the surrounding wall system.
Arched & Curved Windows
Signs you need it
Original arched windows with deteriorated wood frames or failed insulated glass, or new construction that replicates the Mediterranean Revival details found in some Wilton Manors renovations.
What it costs in Wilton Manors
Arched and curved window installation in Wilton Manors typically runs $2,200-$4,500 per opening for custom-radius frames with impact-rated glazing, with pricing driven by radius complexity and glass size.
How we do it
We field-measure the radius with a custom trammel or digitizer, specify the curved frame from a manufacturer tooled for radius work, and install with pre-formed flashing that matches the wall plane without field cutting.
What Custom & Geometric Windows Costs in Wilton Manors
| Item | Typical range in Wilton Manors |
|---|---|
| Geometric/Shaped Window (triangle, trapezoid, installed) | $1,400-$3,200 |
| Arched/Curved Window (custom radius, installed) | $2,200-$4,500 |
| Custom template and field measurement service | $280-$450 |
Can geometric windows still be impact-rated in Wilton Manors?
Yes - every custom and geometric window we specify carries laminated impact-rated glass and frame testing to the same large-missile standards as rectangular units; the shape does not reduce the rating. Call (754) 254-7558 to review approval documentation for your specific design.
How long do custom windows take to manufacture for Wilton Manors?
Most custom geometric windows deliver in 6-10 weeks from template approval, with arched units typically at the longer end due to radius tooling requirements; we coordinate installation scheduling once freight is confirmed. Call (754) 254-7558 for current lead times.
Brands We Service in Wilton Manors
We specify from eight verified manufacturer lines - including ECO Window Systems, Therma-Tru, and ViewLux - selected by what the opening requires, not by what is in stock. Parts for common service needs are stocked locally through our Miami-area logistics, with most non-stock items delivering within 48 hours. See our brands for full specifications and performance tiers.
Pricing for Windows & Doors in Wilton Manors, FL
| Service | Typical range in Wilton Manors |
|---|---|
| Single/Double Hung Window (impact-rated, installed) | $850-$1,650 |
| Horizontal Roller Window (impact-rated, installed) | $950-$1,850 |
| Entry Door (impact-rated fiberglass/steel, installed) | $1,850-$3,400 |
| Hurricane-Rated Front Door (with impact glass, installed) | $2,400-$4,200 |
| Low-E/Argon upgrade (per opening) | $80-$140 |
| ENERGY STAR Impact Window (installed) | $1,050-$1,950 |
| Hurricane-Rated Garage Door (16 ft, installed) | $2,200-$4,800 |
| Wind-Load Code Compliance Package | $380-$720 |
| Geometric/Shaped Window (installed) | $1,400-$3,200 |
| Arched/Curved Window (installed) | $2,200-$4,500 |
Prices in Wilton Manors push toward the upper end when openings require frame repair due to salt-air corrosion, when jalousie-to-modern conversions need extensive siding remediation, or when custom shapes require radius tooling. The written price from your measured survey is the price on the final invoice - no change orders, no surprises.
Neighborhoods We Serve in Wilton Manors
We work across all of Wilton Manors’ compact 2-square-mile footprint, from the Middle River canal-front homes to the interior blocks of original 1950s ranches. Scheduling and dispatch are coordinated from our Miami-area office, with crews arriving to Wilton Manors properties typically within 90 minutes of the appointed window.
- Middle River Estates
- Wilton Drive corridor
- Island City
- North Wilton Manors
- Richardson Historic District
Service Area - Cities Near Wilton Manors
Our crews serve the full Broward County corridor surrounding Wilton Manors, including Margate, FL, North Lauderdale, FL, Coconut Creek, FL, and Coral Springs, FL. Every job in these cities operates under the same Haven Standard: written price before work starts, verified crew, documented photo record, and the 365-Day Done Right Promise.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wilton Manors
Yes - Broward County requires permits for window replacement that changes the frame or product type, and we pull them as standard scope on every qualifying job; the permit number appears on your written scope, and we schedule inspections for final approval.
Most insurers classify jalousie windows as unprotected openings that do not meet hurricane coverage requirements; check your policy’s windstorm provisions or ask your agent directly, and we can document replacement options that satisfy carrier requirements.
Yes - every engagement begins with a free measured survey you keep, and we deliver a written line-item quote before any work is scheduled; we also offer a free second opinion on any competitor’s written estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wilton Manors Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L.